MaXterile PS130

Low Temp Plasma Sterilizer

• Pre- chamber Cleaning: Pre- vacuum, H2O2 Injection, Diffusion.
• Plasma Sterilization: Vacuum, Plama Processing & Sterilization, H2O2 Injection, Diffusion.
• Post Chamber Cleaning: Vacuum, Plasma Processing, Venting.
• Built in Therma Printer.
• Speedy Sterilization Time within 30-60 min
• Environmentally Friendly: H2o2 Discomposes to Oxygen and Vapor Water, Leaving No Residues.
• High- Performance Microprocessor.
• Self-Diagnosis and display error 
• Capacity: 130 Lt
• Sterilization Temp: Max 60℃
• Sterilization Agent: 50% Hydrogen Peroxide
• Vacuum Capacity: 25m3/ hr
• 220V, 50/60 Hz, 1 Phase

MaXterile

Autoclave, Top Loading/ Vertical 

• Innovative Easy-to-Use Digital Fuzzy Controller.
• Electric Door Lock Sensing System for User Safety.
• Automatic Door Lock at 80℃.
• 47-60- 80- 100 Lt
• Digital Timer Function - Delay Time and Operation Time.
• Solid Mode or Liquid Mode can be selected upon sample phases.
• Water Low Level Detection.
• Automatic Over Pressure Release Valve for User Safety.
• Sterilization Error Indication - Error Alarm and Message for Power Failure and Temperature Error.
• Printing Sterilization Cycle Data for Validation and Analyze of Sterilization (Temperature, Pressure, Time and Error Status, etc) - MaXterile R models only.

MaXterile FL90

Autoclave, Front Door 90 Lit

• Class- B Sterilization Cycle by EN285 Standard: Pre-Vacuum Stem Generation, Stem Injection, Sterilizing, Exhaust, Post- vacuum Drying, End of Cycle.
• Pre- Vacuum Air Removal & Post Vacuum Drying for Perfect Sterilizing.
• Built-in Stem Generator Supplies Water Automatically and Sprays Steam into the Chamber.
• Water Ejector Vacuum Pump: Effective for Fluid Control (1800Lt/h)
• Air Filtration System: 0.3 HEPA Filter of Efficiency up to 99.97%
• Capacity: 90 Lt
• Temp Range: 110℃~ 135℃
• Pressure & Gauge: 0.4~2.3 bar, Built in Analog & Digital Pressure Gauge
• 220v 50/ 60Hz 1 Phase

MaXterile PS60

Low Temp Plasma Sterilizer

• Pre- chamber Cleaning: Pre- vacuum, H2O2 Injection, Diffusion.
• Plasma Sterilization: Vacuum, Plama Processing & Sterilization, H2O2 Injection, Diffusion.
• Post Chamber Cleaning: Vacuum, Plasma Processing, Venting.
• Built in Therma Printer.
• Speedy Sterilization Time within 30-60 min
• Environmentally Friendly: H2o2 Discomposes to Oxygen and Vapor Water, Leaving No Residues.
• High- Performance Microprocessor.
• Self-Diagnosis and display error 
• Capacity: 56 Lt
• Sterilization Temp: Max 60℃
• Sterilization Agent: 50% Hydrogen Peroxide
• Vacuum Capacity : 400Lt/min
• 230v, 50/60 Hz

MaXterile DH-30 & DH-50

Dry Heat Sterilizer

• Optimized Air Flow by Force-air Mechanism
• 3 Side Heating Zone: The Best Temp Uniformity & Accuracy by High Performance Heating Mechanism
• Digital PID Control System Implementing Superior Temperature Accuracy
• Patented Jog- Dial Control SYSTEM
• Capacity: 32 & 50 Lt
• Heater Power: 500 W & 650W
• Circulation: force air type
• 230v, 50/60 Hz

MaXterile BT

Autoclave, Bench- Top Front Door